Need recomendations on upgrading and accesorizing WE GBBR SCAR
 

The reason for this message is i want to know what kind of upgrades and accessories are recommended for this gun? I have gamed with it several times now and i have already purchased;
>Bomber lightweight aluminum bolt
>RAS NPAS valve
>EOTech hurricane 80 replica holographic site
>EGLM(no 40mm yet)

What i was thinking about getting was;
>150mm-200mm silencer
>WE SCAR Long Barrel Converion Kit (14mm+ i think)
>Inner barrel 6.02mm or 6.03mm long enough to encompass the full length of the long barrel conversion kit and silencer (515mm roughly)
>top of the line hopup
>your recomendation of 40mm grenades for my EGLM
>4" rail covers for the side rails
>and anything else you can think of that i might need or want

If you are going to run the EGLM you will need a good SLING...

Oh ya of course. And the sling needs to be universal or designed specific for the SCAR, the sling mounts are tight to the frame and there isnt enough of a barrel for a standard M4 sling to attach to.

There are sling attachment points at the front and at the rear of the upper receiver... and one on the top of the butt stock.

Use a loop of paracord for a sling attachment point... or put a largish split ring through the sling attachment point ( paracord loop is better and quieter )

get this sling YouTube- Blue Force Gear Vickers Sling Shoulder Transitions Live Fire

Thats a sweet sling brian, my buddy won a standard M4 sling from this years Claybank game so maybe i will buy it and try to make something work for my gun.

Yesterday i did some research and i found most of the parts and accesories i wanted;

2x 9 rib rail covers
2 seperate hopup sets(both hard rubber) and a marui H bucking
115mm barrel extender
200mm silencer
2x deep fire-SS 6.02mm 407mm inner barrels

what i want to try to do is cut one inner barrel to match the total length of the scar and barrel attachment. Then cut the appropriate amount to fit the silencer. What i was thinking of doing was putting an O-ring where the 2 barrels meet eachother(barrel extension to silencer) to minimize velocity loss due to escaping gases

The vickers is an awesome sling. I had a Gun fail (the gun in my sig picture), slung the thing to my back and used a loaner, totally forgot about the gun on my back for the bulk of my playing time and only noticed it once when I was standing from a crouch and didnt adjust properly for the added weight on my back and bumped against a wall (so much for being stealthy). The vickers held position and never shifted.

Instead of the no name silencer, why not get a QD Scar type. I believe airsoftparts.ca is doing a "preorder" or something for the Dytec ones.

Cheers

Umm...when you say,
"top of the line hopup"
"2 seperate hopup sets(both hard rubber) and a marui H bucking"
"2x deep fire-SS 6.02mm 407mm inner barrels"

Is the "top of the line hopup" that you're getting allow you to use AEG barrels/hopup rubbers and buckings in the WE SCAR platform?

That'd be cool...can you provide a link to the one you're getting?

Shab, even without the EGLM Scars are effing heavy by the end of the day.

Get VFC PEQ15, AAC SCAR QD Silencer, M910 Surefire looks nice on SCARs, EOTech 553 and save up for magazines.