Airsoft Canada
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Media (https://airsoftcanada.com/forumdisplay.php?f=30)
-   -   My First GBBR (https://airsoftcanada.com/showthread.php?t=107336)

Thanh July 10th, 2010 13:49
My First GBBR
 
Bought it from Huang at Airsoft Depot


http://i126.photobucket.com/albums/p...sota/photo.jpg
Sorry for the shitty iPhone Camera shot.

Special Thanks goes to Alfred for the nice paint job for the lower receiver.

Got to love the recoil :)

http://sphotos.ak.fbcdn.net/hphotos-..._3734284_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._8020338_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3738888_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._6873392_n.jpg

*Edit
EOTech 552 is a clone :)

Gunny_McSmith July 10th, 2010 20:12
Does it shoot SEMI and BURST or SEMI and AUTO?

Gato July 10th, 2010 20:22
Quote:
Originally Posted by Gunny_McSmith (Post 1271588)
Does it shoot SEMI and BURST or SEMI and AUTO?
Looks like an M4A1 Carbine, so should be auto

Thanh July 10th, 2010 20:23
Quote:
Originally Posted by Gato (Post 1271590)
Looks like an M4A1 Carbine, so should be auto
its burts, but its still good

Gato July 10th, 2010 20:27
Quote:
Originally Posted by Thanh (Post 1271592)
its burts, but its still good
So it's selector says "Safe, Semi, Auto" and it's clearly supposed to be an M4A1 Carbine, but it fires burst? That's fucked, who makes the thing?

Thanh July 10th, 2010 21:26
Quote:
Originally Posted by Gato (Post 1271594)
So it's selector says "Safe, Semi, Auto" and it's clearly supposed to be an M4A1 Carbine, but it fires burst? That's fucked, who makes the thing?
I bought this, they call it auto for some reason :S,

http://airsoftdepot.ca/catalog/produ...roducts_id=471

turok_t July 10th, 2010 21:41
It says auto because thats the standard for lower receivers...its a standard crappy plastic lower that was painted.

Eien July 10th, 2010 22:45
Clone EOTech? How does it hold up against the recoil?

Thanh July 10th, 2010 23:33
Quote:
Originally Posted by Eien (Post 1271650)
Clone EOTech? How does it hold up against the recoil?
*edit
Definitely a clone

http://www.impactguns.com/store/media/eotech_510_aa.jpg

kullwarrior July 11th, 2010 00:57
nice to see the paint went well. I'll tell you in two games of skirmish you will want to upgrade to a metal body as the plastic is pretty weak.

13Fido13 July 11th, 2010 01:16
Start sourcing a metal body now. I had my pistol grip try to crack off of mine. Replace it ASAP.

Thanh July 11th, 2010 10:37
How about AEG's? most of them are plastic are they not? my last TM M4 was fully plastic, never had a problem with body cracking.

But yes you're probably right, I'll end up getting a full metal body someday. I'm looking into a good quality G&P lower receiver. I was going to get a D-boy metal lower receiver, but people are telling me its not so good.

Daiviet July 11th, 2010 10:49
AEG's are different, they don't have a large recoiling metal mass to deal with every shot. The repeated impact from the bolt carrier puts too much stress on different components, especially if they're made of plastic.

KEVORKIAN July 11th, 2010 11:07
Quote:
Originally Posted by Thanh (Post 1271670)
Are you sure it's NOT a clone...looks like a clone!

Thanh July 11th, 2010 11:49
Quote:
Originally Posted by KEVORKIAN (Post 1271788)
Are you sure it's NOT a clone...looks like a clone!
I dont know, maybe it is a clone, I can't tell.


All times are GMT -4. The time now is 02:49.
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.