Airsoft Canada - View Single Post

teriases · June 20th, 2010, 18:58

Hi guys,

Tried to search on VFC SCAR issues or problems, cant seem to find any...

Basically, I got a VFC SCAR brand new few weeks ago. Never gamed, only tested at home. I have 2 new batteries for it, it still have charges in it, so I started to use it.

Thing is, when I first got it, i tried it with the iron sights. The shots seems to be landing wayyyyy down(I know the flip up sights makes shots go down, but I'm talking about at least 5inches down...). So I played with the hop up a bit, and its allot better.

Now when I got a new ICS M4 lately, and compared to it, the VFC SCAR seems to be extremely inaccurate... The "cone" of fire is about 15 degrees(my estimate), as compared to the M4 of about 6 degrees!

So today I am testing it again just doing some target practice against a target about not even 8ft away. Basically as I mentioned before shots are landing at random spots... some are high, some are low, some are off to the right, etc etc... very weird. I kept testing it to the point that the batteries are dead(or at least I think so, motor wouldn't move at all when trigger pulled).

So, my question is - does batter power effect accuracy? I was using new batteries, so they should have a full charge right? I only put thru not even over 200 rounds, is it possible there are still battery power, but there's an electrical issue?(I have 2 batteries by the way, both seems to be dead).

Anything help or suggestions would be great. I am going to try to take the thing apart tonight to see if there's anything odd I see. Will keep updated.

June 20th, 2010, 18:58	#1
teriases Trader rating Join Date: Apr 2010 Location: Missisauga, Ontario	VFC SCAR issues Hi guys, Tried to search on VFC SCAR issues or problems, cant seem to find any... Basically, I got a VFC SCAR brand new few weeks ago. Never gamed, only tested at home. I have 2 new batteries for it, it still have charges in it, so I started to use it. Thing is, when I first got it, i tried it with the iron sights. The shots seems to be landing wayyyyy down(I know the flip up sights makes shots go down, but I'm talking about at least 5inches down...). So I played with the hop up a bit, and its allot better. Now when I got a new ICS M4 lately, and compared to it, the VFC SCAR seems to be extremely inaccurate... The "cone" of fire is about 15 degrees(my estimate), as compared to the M4 of about 6 degrees! So today I am testing it again just doing some target practice against a target about not even 8ft away. Basically as I mentioned before shots are landing at random spots... some are high, some are low, some are off to the right, etc etc... very weird. I kept testing it to the point that the batteries are dead(or at least I think so, motor wouldn't move at all when trigger pulled). So, my question is - does batter power effect accuracy? I was using new batteries, so they should have a full charge right? I only put thru not even over 200 rounds, is it possible there are still battery power, but there's an electrical issue?(I have 2 batteries by the way, both seems to be dead). Anything help or suggestions would be great. I am going to try to take the thing apart tonight to see if there's anything odd I see. Will keep updated.