|
You can try to take out the fill valve out of the grenade as suggested, and tighten the bottom cap of the fill valve assembly, sometimes they do arrive loose and become loose after use.
If you take the fill valve assembly apart you will have 3 main parts; the end cap, a spring, and the inlet valve. This little valve will have a tiny o-ring, make sure that o-ring is undamaged and silicone it too. When you put it back together use a small drop of blue loctite on the threads of the end cap before you screw it back together and the fill valve assembly will never come apart again. And as coachster says do not over tighten, snug is fine for the assembly.
|