[Hazer]

Originally Posted by StanB.

Hmmm, I lubed up the Oring from my piston and the oring from my velocity reducer, put silicone spray on alle moving parts and now the fps values are not that unstable anymore, they now are between 400 and 420 which is kinda steady for a gas gun out of experience.

I already got the screw for the TDC mod and will do it in the next few days.

My new problem is the following: I just got my new hopup chamber and hopup rubber from ratech, adjusted everything properly, set the hupup rubber perfect in place and reassembled everything, but now the bullets just keep rolling out of the barrel, not every shot, but every second shot, disassembled the whole gun again, checked the hopup unit and every freaking thing, messed around with the hopup rubber a bit and reassembled everything, went fine for 3 mags then bullets started to roll out again.

Any ideas WHAT THE HELL the problem could be? Bullets come out of the mag properly, hopup rubber sits perfectly, and is not too thin so bullets get through rather easy and the hopup isn't working anywas so that can't be a problem.

Kinda desperate atm as a game is comming up and I want to go there with my main again.

What size Grub screw did you use? How'd you know exactly where and how to drill? Did you do the mod yourself? I want to do it too, but want to make sure I make no mistakes. Thanks.