Airsoft Canada - View Single Post

KBarlow · January 30th, 2013, 17:23

Ok, so:

1. Pull back bolt.
2. Bolt locks back.
3. Push bolt forward, moves about half an inch then grinds to a stop.
4. Forcing bolt forward forces the piston over the sear and damages it.

This is what I don't understand.

January 30th, 2013, 17:23	#9
KBarlow attention whore wants a custom title. Trader rating Join Date: Jan 2011 Location: Kamloops, BC	Ok, so: 1. Pull back bolt. 2. Bolt locks back. 3. Push bolt forward, moves about half an inch then grinds to a stop. 4. Forcing bolt forward forces the piston over the sear and damages it. This is what I don't understand. __________________ Airsoft Kamloops