Quote:
Originally Posted by HKGhost
After reading the description and progression of the issue, I'd say your switch assembly contacts is the cause. Running lipo without a basic mosfet will cause the switch assembly contacts to corrode, and if you continue to use the gun, the contacts will be eaten away and then fall off. I've seen this many times with guns running lipo and without a mosfet.
|
+1
I did that to a VFC of mine. Symptoms were also the same as cminke's.
Now they both have mosfets, although my KWA M4A1 ran 11.1V LiPo since I got it last year and when I opened it to rewire for the mosfet, the contacts showed no burn...