Quote:
Originally Posted by Sequential
You have a good mid-frame, that is the advance frame which has the small box inside for the hammer internals. Be-careful when installing the thumb safety. Do not put the left side in yet. Put the right side in first and see if it works. If it works fine loosely then proceed installing the left side. I recall this is an issue, I can ask my friend in Hong Kong about it and let you know how to fix it.
|
Thanks man ! I think i have forgotten one rule , always use all the parts from the hammer set, but the hammer set has a different sear. Much longer and thinner then the sear from the advanced small hammer box. I have put all the parts next to each other to compare :
[IMG]
[/IMG]
So i have been looking around at the online shop, were i got these parts from and it seems they sell hammer sets which includes the same sear as from the advanced small hammer box (Steel Hammer for Marui 1191 ??)
http://www.prog4.com/db/product-show.asp?refno=AR1607
I quess there would be a reason why this hammer is sold with another sear.
I tried a Tokyo Marui Hi Capa hammer and it fits a little bit better. I think the hammer set that i bought is not compatible with this box. I have already mailed the shop owner with all the part numbers which i bought from his shop, but he thought that my RIGHT tumb safety was blocking the whole Tumb safety and adviced me to sand the Right tumb
I will mail him these finding to now, let hope this is just an incompatibility problem. I am also curious about your friend in HK
