Airsoft Canada - View Single Post

N_Force · May 11th, 2016, 09:13

Next issue I'd found year ago from mine 870, and recently from Cav's new aow, is that after you racked and loaded shell in chamber, the pump would be locked by pump lock, but it still remain 2-3mm space to be moved back and forth, that could be the reason, even when it's new.
Check yours after pumped and locked, lightly move the forend back and forth to see how much spacing it has, keep an eye on the bolt front you'll see. If so, that mostly is the problem. That means when you pull trigger, you have to keep the forend push forward and minimize the spacing that could block the hammer striking the push pin.
Cav you have the same issue that I told you if you remember It? Try it see, hope that is it!

May 11th, 2016, 09:13	#222
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	Next issue I'd found year ago from mine 870, and recently from Cav's new aow, is that after you racked and loaded shell in chamber, the pump would be locked by pump lock, but it still remain 2-3mm space to be moved back and forth, that could be the reason, even when it's new. Check yours after pumped and locked, lightly move the forend back and forth to see how much spacing it has, keep an eye on the bolt front you'll see. If so, that mostly is the problem. That means when you pull trigger, you have to keep the forend push forward and minimize the spacing that could block the hammer striking the push pin. Cav you have the same issue that I told you if you remember It? Try it see, hope that is it! __________________ aka Uncle Last edited by N_Force; May 11th, 2016 at 09:18..