Quote:
Originally Posted by Katipunero
You tend to not want to overfill mags when filling with propane. Usually 4-6 seconds is sufficient, and I tend to not fill until hissing stops.
If you see gas come out every shot, then you've overfilled. There's no more space in the mag for the gas to expand, so then excess gets spewed out when you fire. Ideally, you want to not see any or much gas escape, and this will be the best balance for propane to expand and give the best fps/shooting experience.
As for shooting out 4 bb's, I don't think that's possible unless you were misfiring 3 out of 4 times jamming bb's in the barrel and then the 4th blew them all out. Does your m&p come with the blue WE 6.03 tightbore barrel?
Could be 2 things at this point:
1) barrel is dirty/blocked and caused 3 bbs to jam
2) your bbs are of low quality that some of them are larger or closer to the 6.03 barrel size to get hung up in your barrel somehow.
If you're running propane, it's best to run it dry and only lubricate the seals of the mag, pistol nozzle and sliding/moving parts. Oil in your barrel / hop up can and will attract dirt and cause jamming issues like your 4 bb shot you described.
|
Thanks for your response. Yea I do notice quite a lot of gas escaping after Im finished filling a mag but I was told I couldnt overfill since the propane would just stop flowing... I dont think dirt would be blocking the gun since It hasnt left my room since I got it. I havent played with it yet.
https://www.amazon.ca/Tactical-Force...ds=airsoft+bbs These are the bbs im using.
And this was the gun I got
http://www.herooutdoors.com/we-m-p9-w-silencer-black/. Came with a longer inner barrel and a suppressor was necessary to hide it so I changed it to the smaller barrel that came with.