Airsoft Canada - View Single Post

MadMax · January 27th, 2006, 18:15

I glossed over that one as I thought that the issue was resolved.

Certainly looks gooey in that mechbox. It's often not too much of a problem though if you make sure that they cylinder window doesn't open towards the inside of the mechbox. It should point outside to prevent grease from getting into they cyl thru the window. I like to wipe down the inside of a cyl before reassembly leaving only a very thin film of lubricant. Too much grease eventually finds it's way around the oring and gets to the inside of they cyl and gets blown into the barrel.

January 27th, 2006, 18:15	#19
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	I glossed over that one as I thought that the issue was resolved. Certainly looks gooey in that mechbox. It's often not too much of a problem though if you make sure that they cylinder window doesn't open towards the inside of the mechbox. It should point outside to prevent grease from getting into they cyl thru the window. I like to wipe down the inside of a cyl before reassembly leaving only a very thin film of lubricant. Too much grease eventually finds it's way around the oring and gets to the inside of they cyl and gets blown into the barrel. __________________ Want nearly free GBB gas?