![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
Mix and matching gearbox shell halves
Hello, this is kind of a odd question, but my vfc 416 had the v2 problem of the trigger post breaking off. I ordered a new lonex gearbox, but the lonex gearbox doesn't have the bolt catch mechanism on it, which is a feature I really want to keep. Can I just take the lower part of the lonex gearbox and the top half of the vfc one? So I get both? Or would it cause stress and problems?
__________________
Proud owner of:
-TM Scar H Vfc 416 -Ares G36c TM Glock 18c -G&G F2000 KWA Vector -VFC FNX45 G&G P90 -G&G M14 EBR G&G AKS-74 -KWA USP Tac TM 1911a1 -TM 5-7 WE MP5k -VFC Mp7 VFC HK417 -Scorpion Evo SMG Scorpion Evo Carbine |
|
![]() |
![]() |
![]() |
#2 |
No, you can't.
But you CAN drill a small hole where the post was, and install a long setscrew with thread locker. It will replace the post perfectly and never break. |
|
![]() |
![]() |
![]() |
#3 |
That's smart! Any recommendation for the size of screw to use?
__________________
Proud owner of:
-TM Scar H Vfc 416 -Ares G36c TM Glock 18c -G&G F2000 KWA Vector -VFC FNX45 G&G P90 -G&G M14 EBR G&G AKS-74 -KWA USP Tac TM 1911a1 -TM 5-7 WE MP5k -VFC Mp7 VFC HK417 -Scorpion Evo SMG Scorpion Evo Carbine |
|
![]() |
![]() |
![]() |
#4 |
__________________
![]() SuperCriollo |
|
![]() |
![]() |
![]() |
#5 |
2mm or 4-40 works fine.
|
|
![]() |
![]() |
![]() |
#6 |
__________________
Proud owner of:
-TM Scar H Vfc 416 -Ares G36c TM Glock 18c -G&G F2000 KWA Vector -VFC FNX45 G&G P90 -G&G M14 EBR G&G AKS-74 -KWA USP Tac TM 1911a1 -TM 5-7 WE MP5k -VFC Mp7 VFC HK417 -Scorpion Evo SMG Scorpion Evo Carbine |
|
![]() |
![]() |
![]() |
#7 |
You can mix gearbox shells many times. Try it before you give up.
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |